Need help?Do you have a question about the BEHA UNITEST 2000 alpha and is the answer not in the manual?
General| Display | LCD |
|---|---|
| RCD Testing | Yes |
| RCD Test Current | 10mA, 30mA, 100mA, 300mA, 500mA |
| Accuracy | ±2% |
| Dimensions | 200 x 100 x 50 mm |
Defines the intended and safe operating conditions and purposes for the voltage tester.
Covers essential preparation steps and safety precautions before performing measurements.
Details the procedure for conducting voltage tests, including how voltage is indicated.
Explains the process for performing a single-pole phase test to identify live conductors.
Describes voltage testing in RCD-equipped systems and how to avoid RCD tripping.
Details the resistance measurement procedure, specific to the UNITEST 2000 gamma model.
Provides instructions for performing continuity and diode tests using the voltage tester.
Explains the function and procedure for determining the rotary field direction.
Describes the measurement point illumination feature for improved visibility in low light.
Provides guidelines for cleaning the voltage tester safely and effectively.
Recommends periodic calibration to ensure measurement accuracy and reliability.
Details the steps for safely replacing the batteries in the UNITEST 2000.
To Next Page
