Need help?Do you have a question about the Behringer B-2 Pro and is the answer not in the manual?
General| Type | Studio microphone |
|---|---|
| Microphone holder | Yes |
| Microphone frequency | 20 - 20000 Hz |
| Microphone direction type | Cardioid |
| Device interface | XLR-3 |
| Connectivity technology | Wired |
| Power source | DC |
| Operating voltage | 48 V |
| Power consumption | 3 mA |
| Output impedance | 100 Ω |
| Total Harmonic Distortion (THD) | 1 % |
| Line-out Signal-to-Noise Ratio (SNR) | 77 dB |
| Product color | Metallic |
Weight and Dimensions| Width | 56 mm |
|---|---|
| Height | 210 mm |
| Microphone weight | 550 g |
Key safety warnings, handling instructions, and precautions to prevent damage and ensure safe operation.
Details on registering equipment and the terms and conditions of the product warranty.
Information on the required +48 V phantom power supply and microphone stabilization time.
Explanation of cardioid, omnidirectional, and figure eight directivity patterns and their uses.
How to use the low-cut filter for interference and the level attenuator for high sound pressure levels.
Instructions for mounting the microphone on a stand and connecting it via XLR cable.
Guidance on adjusting gain and EQ for optimal sound quality and microphone positioning.
Details on transducer type, operating principle, and polar pattern characteristics.
Open circuit sensitivity, frequency response, maximum SPL, and equivalent SPL ratings.
Information on signal-to-noise ratio, impedance, supply voltage, and current.
Details regarding the microphone's physical dimensions and overall weight.
To Next Page
