Behringer B-5 User Manual

User Manual
SINGLE DIAPHRAGM CONDENSER
MICROPHONE B-5
Gold-Sputtered Diaphragm Studio Condenser
Microphone with 2 Interchangeable Capsules

Behringer B-5 Specifications

Microphone Specifications

transducer type	true condenser
diaphragm size	18 mm (0.71") single diaphragm
polar pattern	1 x cardioid, 1 x omnidirectional, exchangeable

Sensitivity and Frequency

open circuit sensitivity (cardioid)	-38 dBV (0 dBV = 1 V/Pa), 12.6 mV/Pa
open circuit sensitivity (omnidirectional)	-40 dBV (0 dBV = 1 V/Pa), 10 mV/Pa
frequency response	20 Hz - 20 kHz

Sound Pressure Levels

max SPL (1% THD @ 1 kHz)	140 dB (0 dB), 150 dB (-10 dB)
equivalent SPL (cardioid)	16 dB-A
equivalent SPL (omnidirectional)	18 dB-A

Electrical Characteristics

nominal impedance	70 Ω
load impedance	>1 kΩ
supply voltage	+48 V

Physical Characteristics

dimensions	Ø shaft: 20 mm / Length: 120 mm
weight	approx. 0.21 lbs / 0.09 kg
supply current	3 mA

Summary

Important Safety Instructions

Electrical Safety and Warnings

Covers precautions against electric shock and explanations of safety symbols.

Handling and Environmental Precautions

Advice on moisture sensitivity, dropping, and proper power supply usage.

Post-Use Care and Storage

Instructions for cleaning and storing the microphone after use to maintain its condition.

Power Supply

Pickup Patterns

Cardioid Pickup Pattern

Explains the cardioid pattern, its directional use, and the proximity effect.

Omnidirectional Pickup Pattern

Details the omnidirectional pattern, its use for ambience, and natural sound.

Low Cut-Filter and Level Attenuation

Microphone Installation

Changing Microphone Capsules

Capsule Handling Precautions

Guidelines for safely attaching and removing microphone capsules to prevent damage.

Audio Connection

Level Setting/Adjusting the Basic Sound

Specifications