4
STUDIO CONDENSER MICROPHONE B-2
8. SPECIFICATIONS
Transducer type: condenser, dual-diaphragm
Operating principle: pressure gradient
Polar pattern: omnidirectional / cardioid (switchable)
Connection: gold-plated balanced XLR connector
Open circuit voltage (at 1 kHz): -38 +/-2 dBV (0 dBV = 1 V/Pa)
Frequency response: 20 Hz - 20 kHz
Level attenuation: -10 dB (switchable)
Low-Cut filter: 6 dB/Oct. at 150 Hz (switchable)
Open circuit characteristic: 16 mV/Pa
Max. SPL (1% THD @ 1 kHz): 135 dB (0 dB), 145 dB (-10 dB)
Equivalent SPL (IEC 268-4): 18 dB-A
Signal-to-noise ratio: 76 dB, A-weighted
Nominal impedance: < 200 W
Load impedance: > 1000 W
Supply voltage: +48 V
Supply current: approx. 3.5 mA
Dimensions: Æ head: 56 mm, Æ shaft: 50 mm, length: 210 mm
Weight: approx. 0.520 kg
Polar pattern Frequency response (omnidirectional)
Polar pattern Frequency response (cardioid)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
illustrated.
8. SPECIFICATIONS
To Previous Page
Loading...
Need help?
General
