EasyManua.ls Logo

Behringer B105D - Bluetooth Pairing Procedure; Audio Input Configuration

Behringer B105D
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Connect all analog microphone, instrument, and/or RCA cables to their respective input jacks.
DO NOT turn on the power yet.
4. Turn on your audio sources (mixer, microphones, instruments).
5. Power up the B105D by moving the POWER switch to the “on” position. The POWER LED on the front panel
will light up.
6. To pair a Bluetooth device with the B105D, follow these steps:
Press the BLUETOOTH button to activate the Bluetooth circuit. The BLUETOOTH button’s indicator LED
will blink.
Open Bluetooth in your smartphone, tablet computer, MP3 player or other Bluetooth equipment to pair and
connect.
When the BLUETOOTH button’s LED lights solid, you can begin playing back music from your Bluetooth
device.
7. Slowly rotate the MAIN LEVEL knob clockwise until you achieve a comfortable listening level.
8. Insert your USB device with MP3 audio files into the USB input.
9. Start or stop MP3 playback by pressing the PLAY/PAUSE () button. Skip or scroll through tracks by using the
BACK or FORWARD buttons begins.
10. Turn the MAIN LEVEL knob up to a comfortable level.
11. Plug a microphone or instrument into the MIC/LINE 1 combo jack.
12. If you are using a microphone, press the MIC/GUITAR latching switch to the inward MIC position. If you are
using an instrument, such as guitar or bass, move the MIC/GUITAR latching switch to the outward GUITAR
position.
13. While playing or speaking into the microphone, slowly rotate the LEVEL 1 knob clockwise until you reach a
comfortable level. If you notice any undesirable distortion in your instrument or mic sound, turn the LEVEL 1
knob back down until the distortion stops.
14. Plug additional audio devices into the LINE 2 combo jack or LINE INPUT jack (for audio devices such as
smartphones, tablets or MP3 players that use 1/8″ stereo connectors).
15. While playing audio from these additional audio devices, slowly turn the LEVEL 2 knob clockwise until you
achieve a comfortable listening level. If necessary, adjust the output levels on your audio devices.
16. Balance the analog signals against the MP3 and Bluetooth playback by adjusting the LEVEL knobs for each

Other manuals for Behringer B105D

Related product manuals