Need help?Do you have a question about the Behringer TRUTH B2031A and is the answer not in the manual?
Audio Inputs| XLR connector | servo-balanced input |
|---|---|
| TRS input | 1/4" servo-balanced input |
| Input impedance | 10 kΩ |
| Max. input level | +22 dBu |
Power Supply| Voltage | 100 - 120 V~, 50/60 Hz, 220 - 230 V~, 50/60 Hz |
|---|---|
| Fuse rating | T 2.0 A H 250 V, T 1.6 A H 250 V |
| Supply current | 100 - 120 V~, 50/60 Hz max. 1.0 A, 220 - 230 V~, 50/60 Hz max. 0.5 A |
Components| Tweeter | ¾" ferrofluid-cooled dome |
|---|---|
| Woofer | 6 ¾" polypropylene diaphragm |
Amplifier| RMS power | 70 W @ 0.1 % THD |
|---|---|
| Peak power | 125 W |
System Specifications| Frequency response | 50 Hz to 21 kHz |
|---|---|
| Sound pressure level max. | 113 dB SPL @ 1 m (pair) |
Dimensions and Weight| Dimensions (H x W x D) | 12 1/2 x 8 2/5 x 8 1/3", 317 x 214 x 211 mm |
|---|---|
| Weight | 21 2/3 lbs / 9.84 kg |
Audio Inputs| XLR connector | servo-balanced input |
|---|---|
| TRS input | 1/4" servo-balanced input |
| Input impedance | 10 kΩ |
| Max. input level | +22 dBu |
Power Supply| Voltage | 100 - 120 V~, 50/60 Hz, 220 - 230 V~, 50/60 Hz |
|---|---|
| Fuse rating | T 5.0 A H 250 V, T 2.5 A H 250 V |
| Supply current | 100 - 120 V~, 50/60 Hz max. 2.0 A, 220 - 230 V~, 50/60 Hz max. 1.1 A |
Components| Tweeter | 1" ferrofluid-cooled dome |
|---|---|
| Woofer | 8 ¾" polypropylene diaphragm |
Amplifier| RMS power | 140 W @ 0.1 % THD |
|---|---|
| Peak power | 265 W |
System Specifications| Frequency response | 50 Hz to 21 kHz |
|---|---|
| Sound pressure level max. | 116 dB SPL @ 1 m (pair) |
Dimensions and Weight| Dimensions (H x W x D) | 15 3/4 x 9 13/16 x 11 3/8", 400 x 250 x 290 mm |
|---|---|
| Weight | 33 lbs / 15 kg |
Critical warnings for safe operation and maintenance to prevent hazards.
Notes on product changes, trademarks, and liability limitations.
Details warranty coverage, exclusions, online registration, and return procedures.
Covers initial setup, shipment inspection, and voltage selection before first use.
Details the function of LEDs, input trim, and rear panel switches for operation and adjustment.
Explains how to connect speakers and adjust input sensitivity for optimal sound reproduction.
Provides guidance on positioning speakers for improved sound and resolution.
Explains how to use rear panel switches to tune the speaker's sound to the environment.
Illustrates how to connect the TRUTH using XLR and 1/4" TRS/TS connectors for signal input.
Lists detailed technical specifications, including audio inputs, components, amplifier, and physical dimensions.
To Next Page
