Need help?Do you have a question about the Behringer TRUTH B2030A and is the answer not in the manual?
Warning about risk of electric shock and not opening the enclosure.
Explanation of symbols used in the manual for warnings and instructions.
Instructions for users regarding servicing and qualified personnel.
Warning against exposing the appliance to rain, moisture, or liquids.
Emphasizes that repairs should only be performed by qualified personnel.
List of general safety instructions for operating the apparatus.
Detailed safety instructions for plug use, thunderstorms, and connections.
Details the limited warranty, authorized dealers, and repair/replacement policy.
Instructions for registering the product online for efficient service.
Procedure for obtaining warranty service and RMA number.
Excludes consumables, fuses, batteries, and unauthorized modifications.
Covers only hardware, not technical assistance or software products.
Warranty void if the serial number is altered or removed.
Excludes damage from improper handling, wear, and tear on parts.
Excludes damage from neglect, misuse, acts of God, or non-compliance.
Voiding warranty by unauthorized repairs or opening the unit.
Customer pays inspection costs if the defect is not covered by warranty.
Policy for repairing products not covered by warranty at buyer's expense.
Purchases from online auctions are 'buyer beware' and not covered by warranty.
Overview of the TRUTH studio monitor's design, components, and capabilities.
Advice on initial setup, listening, and familiarizing with the manual.
Warning about the risks of extreme volumes to hearing.
Instructions for inspecting the unit for damage upon arrival.
Guidance on initial setup, ventilation, and voltage/fuse selection.
Important notes on grounding, cable usage, and electrical safety.
Encouragement to register the product online for warranty and support.
Description of the ON and LIMIT LEDs on the front panel.
Overview of rear panel connectors including INPUT, MAINS, and FUSE compartment.
Instructions for using the POWER switch and safety precautions.
Explanation of the INPUT TRIM control for adapting input sensitivity.
Description of LOW FREQUENCY, ROOM COMPENSATION, and HIGH FREQUENCY switches.
Guidance on connecting the TRUTH speakers to audio sources.
Instructions on setting input levels using the TRIM control and LIMIT LED.
Recommendations for optimal speaker placement for sound quality.
Illustrates correct speaker placement to minimize reflections.
Guidance on placing the speaker horizontally for improved stereo imaging.
Discusses the impact of room acoustics and how to alter them.
How to use ROOM COMPENSATION and other switches to adapt to acoustics.
Explanation of unbalanced TS, balanced TRS, and XLR connectors.
Importance of using balanced connections for signal integrity.
Details of input types, impedance, and maximum input level.
Specifications for tweeters and woofers for both models.
RMS power and peak power ratings for the amplifier section.
Information on crossover type and frequency.
Frequency response and sound pressure level for both models.
Voltage, fuse ratings, supply current, and mains connection.
Physical dimensions and weight for both B2030A and B2031A models.
Warning about risk of electric shock and not opening the enclosure.
Explanation of symbols used in the manual for warnings and instructions.
Instructions for users regarding servicing and qualified personnel.
Warning against exposing the appliance to rain, moisture, or liquids.
Emphasizes that repairs should only be performed by qualified personnel.
List of general safety instructions for operating the apparatus.
Detailed safety instructions for plug use, thunderstorms, and connections.
Details the limited warranty, authorized dealers, and repair/replacement policy.
Instructions for registering the product online for efficient service.
Procedure for obtaining warranty service and RMA number.
Excludes consumables, fuses, batteries, and unauthorized modifications.
Covers only hardware, not technical assistance or software products.
Warranty void if the serial number is altered or removed.
Excludes damage from improper handling, wear, and tear on parts.
Excludes damage from neglect, misuse, acts of God, or non-compliance.
Voiding warranty by unauthorized repairs or opening the unit.
Customer pays inspection costs if the defect is not covered by warranty.
Policy for repairing products not covered by warranty at buyer's expense.
Purchases from online auctions are 'buyer beware' and not covered by warranty.
Overview of the TRUTH studio monitor's design, components, and capabilities.
Advice on initial setup, listening, and familiarizing with the manual.
Warning about the risks of extreme volumes to hearing.
Instructions for inspecting the unit for damage upon arrival.
Guidance on initial setup, ventilation, and voltage/fuse selection.
Important notes on grounding, cable usage, and electrical safety.
Encouragement to register the product online for warranty and support.
Description of the ON and LIMIT LEDs on the front panel.
Overview of rear panel connectors including INPUT, MAINS, and FUSE compartment.
Instructions for using the POWER switch and safety precautions.
Explanation of the INPUT TRIM control for adapting input sensitivity.
Description of LOW FREQUENCY, ROOM COMPENSATION, and HIGH FREQUENCY switches.
Guidance on connecting the TRUTH speakers to audio sources.
Instructions on setting input levels using the TRIM control and LIMIT LED.
Recommendations for optimal speaker placement for sound quality.
Illustrates correct speaker placement to minimize reflections.
Guidance on placing the speaker horizontally for improved stereo imaging.
Discusses the impact of room acoustics and how to alter them.
How to use ROOM COMPENSATION and other switches to adapt to acoustics.
Explanation of unbalanced TS, balanced TRS, and XLR connectors.
Importance of using balanced connections for signal integrity.
Details of input types, impedance, and maximum input level.
Specifications for tweeters and woofers for both models.
RMS power and peak power ratings for the amplifier section.
Information on crossover type and frequency.
Frequency response and sound pressure level for both models.
Voltage, fuse ratings, supply current, and mains connection.
Physical dimensions and weight for both B2030A and B2031A models.
To Next Page
General