Need help?Do you have a question about the Behringer C-4 and is the answer not in the manual?
Transducer and Polar Pattern| Transducer type | condenser, 16 mm (0.63'') |
|---|---|
| Polar pattern | cardioid |
Electrical Specifications| Open circuit sensitivity | -38 dBV (0 dBV = 1 V/Pa) |
|---|---|
| Max SPL | 136 dB |
| Nominal impedance | 75 Ω |
| Load impedance | > 1 kΩ |
| Supply voltage | +48 V |
| Supply current | 3 mA |
Frequency and Level Controls| Frequency response | 20 Hz to 20 kHz |
|---|---|
| Level attenuation | -10 dB, switchable |
| Low-cut filter | 6 dB/oct. @ 120 Hz (switchable) |
Physical Characteristics| Connector | gold-plated balanced XLR connector |
|---|---|
| Dimensions | Æ shaft: 0.9", length: 3.7" (Æ shaft: 23 mm, length: 94 mm) |
| Weight | approx. 0.1 lb. (approx. 0.06 kg) |
Covers electrical shock risks, voltage warnings, moisture sensitivity, proper power supply use, and handling precautions.
To Next Page