Behringer C-4 User Manual

5
SINGLE DIAPHRAGM CONDENSER MICROPHONES C-4 User Manual
9. Specications
Transducer type condenser, 16mm (0.63'')
Polar pattern cardioid
Connector gold-plated balanced XLR connector
Open circuit sensitivity (@1kHz) -38dBV (0dBV=1V/Pa)
Frequency response 20Hz to 20kHz
Level attenuation -10dB, switchable
Low-cut lter 6dB/oct.@120Hz (switchable)
Max. SPL (≤1%THD@1kHz) 136dB
Nominal impedance 75Ω
Load impedance > 1kΩ
Mains Voltage/Fuse
Supply voltage +48V
Supply current 3mA
Physical/Weight
Dimensions shaft:0.9" / 23mm, length:3.7" / 94mm
Weight approx. 0.13lbs / 0.06kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Behringer C-4 Specifications

Transducer and Polar Pattern

Transducer type	condenser, 16 mm (0.63'')
Polar pattern	cardioid

Electrical Specifications

Open circuit sensitivity	-38 dBV (0 dBV = 1 V/Pa)
Max SPL	136 dB
Nominal impedance	75 Ω
Load impedance	> 1 kΩ
Supply voltage	+48 V
Supply current	3 mA

Frequency and Level Controls

Frequency response	20 Hz to 20 kHz
Level attenuation	-10 dB, switchable
Low-cut filter	6 dB/oct. @ 120 Hz (switchable)

Physical Characteristics

Connector	gold-plated balanced XLR connector
Dimensions	Æ shaft: 0.9", length: 3.7" (Æ shaft: 23 mm, length: 94 mm)
Weight	approx. 0.1 lb. (approx. 0.06 kg)