Need help?Do you have a question about the Behringer CE500A-WH and is the answer not in the manual?
General| Power Output | 50W |
|---|---|
| Input Connectors | XLR, 1/4" TRS, RCA |
| Type | Active |
| Woofer Size | 5 inch |
| Tweeter Size | 1 inch |
Warning about electric shock risk and not opening the enclosure. Refer servicing to qualified personnel.
Ensure safety purpose of polarized or grounding-type plugs is not defeated. Consult electrician for outlet replacement if needed.
Instructions on how to link multiple CE500A speakers together using XLR cables.
Connect the IEC power cable to the speaker and mains outlet. Do not turn power on yet.
Connect the audio source to the speaker using XLR or RCA cables.
Connect LINK OUTPUT of one speaker to MIC/LINE INPUT of another using an XLR cable.
Turn on the speakers using the POWER SWITCH. The POWER LED will light up.
Adjust the LEVEL knob for desired volume. Reduce if CLIP LED flashes. Adjust on each speaker if multiple are used.
Installation by qualified personnel only. Improper mounting presents safety hazard. MUSIC Group assumes no liability.
Secure the wall mounting plate to the wall using appropriate screws or anchors.
Fasten the speaker mounting plate to the speaker with included wing screws for vertical or horizontal mounting.
To Next Page