Behringer CL9 Manual

2 COMPRESSOR/LIMITER CL9
◊ ◊ The CL9 has no on/o switch. As soon as you insert the plug
into the in connector, the CL9 is on. When not in use, remove
the plug from the in connector. This extends the life of
the battery.
The SERIAL NUMBER is located at the underside.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 k
Out
Connector ¼" TS
Impedance 1 k
Power Supply
9 V , 100 mA regulated
Behringer PSUSB
USA/Canada 120 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
China 220 V~, 50 Hz
Korea 220 V~, 60 Hz
Japan 100 V~, 50/60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may therefore differ from those listed or shown.

Behringer CL9 Specifications

Power

power supply voltage	9 V
power supply current	100 mA
power consumption	30 mA

Weight and Dimensions

height	54 mm
width	70 mm
depth	123 mm
weight	0.33 kg