Behringer DANALOG DDX3216 User Manual

Live Sound
Benefits of the DDX3216
16 high-grade 24-bit converters and 32-bit internal processing for highest
dynamic resolution.
16 analog inputs, each with EQ, compressor/limiter and gate.
The gate and the fully parametric 4-band EQ can be used to eliminate feed-
back problems.
The busses allow you to record up to 16 signals simultaneously.
128 snapshot memories allow easy reconfiguration of the console for different
songs.
The 4 multi outputs allow you to easily create additional monitor mixes.
Separate level settings for bus routing enable additional on-stage monitor
mixes.
4 built-in effects processors, simultaneously accessible from all 32 channels.
Fader and mute groups allow easy handling of multiple channels.
Up to 276 ms of delay for run-time compensation or effects on the first
16 channels.
The built-in meter bridge gives you full control over all input signal levels.
Inserts on the first 12 channels allow you to integrate outboard analog gear.
Rack-mountable (kit included).
Hints
Use the main EQ to make up for deficiencies in the room acoustics, unless you
have a BEHRINGER ULTRA-CURVE PRO available.
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
5

Behringer DANALOG DDX3216 Specifications

General

Inputs	32
EQ Bands	4-band parametric
MIDI I/O	In/Out/Thru
Faders	17
Motorized Faders	Yes
Bit Depth	24-bit
Display	LCD
Type	Digital
Inputs - Mic Preamps	16
Inputs - Line	16
Outputs - Main	XLR
Digital I/O	ADAT
Effects	Yes
Dynamic Processing	Compressor, Gate
Sampling Rate	48kHz