Behringer DDX3216 - Installation; New Features

2. INSTALLATION
Uploading the update is very simple:
Either upload the update file the same way you would an operating system update
via the “DDX3216 File Exchange” PC software (WINDOWS
®
) or load it in using a PC
card.
The update procedure is described in detail in ch. 16.1 in the DDX3216 user’s
manual.
3. NEW FEATURES
The following new features are available upon installing the surround update:
Activating the SURROUND function on the display page SETUP/OSC >
PREFS (On/Off Select).
•
•
•
•
•
Dialing in surround panning on the desired channel via a second PAN display
page labeled SURROUND.
Live “movements” of a selected sound source (channel) through the surround
space.
Saving surround pan/automating via SNAPSHOT and DYNAMIC
AUTOMATION possible (controlled using the PAN parameter).
New MIDI control possibilities using DIRECT PAR SYSEX for expanded
surround parameters on channels 1-32 and FX return channels 1-8. Activate
this function via display page MMC/MIDI > RX/TX > DIRECT PAR SYSEX as
well as > PAN (also see ch. 13.3).
SysEx #: Parameter:
o 100 surround mute
o 101 surround pre/post
o 102 surround volume
o 103 surround angle
o 104 surround distance
3