Divergence is dependent on both ANGLE and DISTANCE parameters and
only stands out when ANGLE = 0° and DIST = 100 (“100% in front in the
middle”)! In this case, the 3 DIVERG. corner values have the following
ramifications:
When DIVERG. = 0, the signal only comes out of the center
speaker.
When DIVERG. = 100, the signal only comes out of the left and
right speakers.
When DIVERG. = 50, the signal comes from the front left, front
right and the center speaker simultaneously.
Divergence lets you for example widen the sound of the voice of a singer
whose voice comes from the front middle, thus leading to a much more
pleasant-sounding voice than the sound that is otherwise dominated by the
center-front speaker.
7
To Next Page
Loading...
