Behringer Digital Snake S16 - Cascaded S16 Signal Flow; Upstream Signal Flow; Downstream Signal Flow

11 DIGITAL SNAKE S16 User Manual
Signals sent from the X32 to the stage are seen the same on all S16 units in the
chain. AES50 channels 1-8 will appear on the XLR OUTPUTS of each unit.
Toachieve maximum output to the stage, the 2nd and 3rd units in the chain
must have their physical OUTPUTS set to OUT +8 and OUT +16 respectively.
The following chart details the signal ow to and from the stage when
using3S16 units.