EasyManua.ls Logo

Behringer Digital Snake S16 - Technical Specifications; Processing and Connector Details; Mic and Output Characteristics

Behringer Digital Snake S16
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 DIGITAL SNAKE S16 User Manual
7. Specications
Processing
A/D-D/A conversion 24-bit @ 44.1 / 48 kHz,
(Cirrus Logic A/D CS5368, D/A CS4385) 114 dB dynamic range
Networked I/O latency 1.1 ms
(stagebox in > console processing* >
stagebox out)
Connectors
XLR inputs, programmable mic 16
preamps, designed by MIDAS
XLR outputs 8
Phones outputs, ¼" TRS 1 (mono)
AES50 ports, SuperMAC 2
P-16 connector, 1
Ultranet (no power supplied)
MIDI inputs / outputs 1 /1
ADAT Toslink outputs (2x 8 Ch) 2
USB type B, rear panel, 1
for system updates
Mic Input Characteristics
Design MIDAS
THD + noise, 20 dB gain, 0 dBu out < 0.006 % A-weighted
Input impedance XLR, unbal. / bal. 5 kΩ / 10 kΩ
Non clip maximum input level, XLR +23 dBu
Phantom power, switchable per input 48 V
Equivalent input noise level, -128 dBu
XLR (input shorted)
CMRR, XLR, @ 20 dB gain (typical) > 70 dB
CMRR, XLR, @ 40 dB gain > 80 dB
Input/Output Characteristics
Frequency range, @ 48 kHz 10 Hz - 22 kHz
sample rate, 0 dB to -1 dB
Dynamic range, analog in to analog 106 dB
out (typical)
A/D dynamic range, preamp and 109 dB
converter (typical)
D/A dynamic range, 108 dB
converter and output
Cross talk rejection @ 1 kHz, 100 dB
adjacent channels
Output level, XLR, nom./max. +4 dBu / +21 dBu
Output impedance, XLR, unbal. / bal. 75 Ω / 75 Ω
Phones output impedance / level 40 Ω / +25 dBm (mono)
Residual noise level, XLR and TRS -87 dBu A-weighted
Indicators
Display 4-digit, 7-segment, LED
Front status LEDs AES50-A, red/green
AES50-B, red/green
HA Locked, red
SN Master, green
Splitter, orange
Out +16, orange
Out +8, orange
Meter Sig, -30 dB, -18 dB, -12 dB, -9 dB,
-6dB, -3 dB, Clip
Rear panel Splitter mode, orange
Power
Switch-mode autorange power supply
100-240 V (50/60 Hz)
Power consumption 45 W
Physical
Dimensions 482 x 225 x 89 mm (19 x 8.9 x 3.5")
Weight 4.7 kg (10.4 lbs)
*) incl. all channel and bus processing, excl. insert effects and line delays
AES50 is created and owned by the Audio Engineering Society. ADAT is a registered trademark of
inMusic Brands, Inc. Toslink is a registered trademark of Toshiba Corporation. Cirrus Logic is a trademark
of Cirrus Logic, Inc.

Other manuals for Behringer Digital Snake S16

Related product manuals