52
25. SPECIFICATIONS
Main channel strip
Mic input electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz to 22 kHz) -129.0 dBu, 150 Ohms source
-117.3 dBqp, 150 Ohms source
-132.0 dBu, input shorted
-122.0 dBqp, input shorted
Distortion (THD & N) 0.007 % at +4 dBu, 1 kHz, bandwidth 80 kHz
Gain range +10 dB to +50 dB
Max. input +12 dBu (+32 dBu @ PAD)
Line input electronically balanced
Gain range unity to +40 dB (-20 to +20 dB @PAD)
Max. input +22 dBu
Channel fader range +10 dB to -85 dB / off
Aux send gain range off to unity to +15 dB
Equalization
Hi shelving 12 kHz, +/- 15 dB
Hi mid sweep 300 Hz to 20 kHz, +/- 15 dB
Lo mid sweep 50 Hz to 3 kHz, +/- 15 dB
Lo shelving 80 Hz, +/- 15 dB
Lo cut (HPF) 75 Hz, 12 dB/oct.
Channel direct out
Max. output + 22 dBu
Noise @unity gain -94 dBu
Output impedance 120 Ohms
Tape returns bal./unbal. 1/4" jacks, globally switchable from +4 dBu to -10 dBV
Channel insert
Max. in/out +22 dBu
Channel to channel crosstalk -95 dB @ 1 kHz
Mix B channel strip
Gain range off to unity to +15 dB
Hi shelving 12 kHz, +/- 15 dB
Lo shelving 80 Hz, +/- 15 dB
Subgroup section
Noise bus noise @ fader 0 dB:
-102.5 dBr (ref. +4 dBu)
-92.5 dBr (ref. +4 dBu, 24 chs. assigned (input B) & set @ unity gain)
-94.5 dBr (ref. +4 dBu, 16 chs. assigned (input B) & set @ unity gain)
Submaster output max. out +22 dBu balanced/unbalanced
Submaster insert max. out +22 dBu
Submaster insert max. in +22 dBu
Fader range +10 dB to -85 dB / off
Main mix section
Noise bus noise @ fader 0 dB:
-101.0 dBr (ref. +4 dBu)
-92.5 dBr (ref. +4 dBu, 24 chs. assigned (input B) & set @ unity gain)
-94.5 dBr (ref. +4 dBu, 16 chs. assigned (input B) & set @ unity gain)
Max. output +28 dBu balanced XLR, +22 dBu unbalanced 1/4" jacks
To Next Page
Loading...
