To Next PageTo Next Page
Need help?Do you have a question about the Behringer Europower PMP4000 and is the answer not in the manual?
General| Sample rate | 46.875 kHz |
|---|---|
| Frequency range | 10 - 200000 Hz |
| Channels quantity | 20 channels |
| Digital sound processing | 24 bit |
| Total Harmonic Distortion (THD) | 0.002 % |
| DJ mixer | - |
| Product color | Black |
| Power consumption (typical) | 1050 W |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 476 mm |
| Height | 122 mm |
| Weight | 10380 g |
How to set input gain and monitor the level set LED.
How to select operating modes for the amplifier stage (MAIN, MON, BRIDGE).
How to use the graphic equalizer and FBQ feedback detection system.
Importance of grounding the unit and power cord for safety.
Information on the Neutrik Speakon compatible connector and polarity.
Table showing polarity configuration for speaker connectors on different models.
Specifications for mono and stereo line input types, impedance, and max level.
Specifications for preamp outputs, loudspeaker load impedance, and stereo outputs.
Technical specifications for the PMP4000 microphone input section.
Specifications for preamp and monitor outputs.
Specifications for stereo outputs, loudspeaker load impedance, and DSP.
Output power ratings and display specifications for the PMP1000.
