To Next PageTo Next Page
Need help?Do you have a question about the Behringer Europower PMP1680S and is the answer not in the manual?
General| Sample rate | 40 kHz |
|---|---|
| Frequency range | 10 - 200000 Hz |
| Channels quantity | 10 channels |
| Digital sound processing | 24 bit |
| Total Harmonic Distortion (THD) | 0.001 % |
| Line inputs (RCA) | 1 |
| DJ mixer | - |
| Product color | Black |
| Power consumption (typical) | 1050 W |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 460 mm |
| Height | 315 mm |
| Weight | 9900 g |
Covers electrical shock hazards, handling precautions, ventilation, and maintenance by qualified personnel.
Detailed instructions on operation, installation, and servicing to prevent hazards like electric shock and fire.
Detailed description of all controls and indicators on the front panel of the mixer.
Explanation of rear panel connectors such as mains input, speaker outputs, and serial number.
Description of EQ controls (High, Mid, Low), MON, FX, PAN, BAL, and LEVEL for input channels.
Explanation of the multi-effects presets, display, PROGRAM control, and FX IN button.
Description of graphic EQs, FBQ switch, FX RET control, CD/TAPE IN, MONITOR MASTER, and MAIN MASTER.
Details on the POWER AMP switch for operating modes like stereo, dual mono, and bridge mode.
Information on connecting loudspeakers in BRIDGE mode and minimum impedance requirements for all modes.
Details on OUTPUT A for PMP980S/PMP1680S and PMP960M, including mode-specific signal routing.
Details on OUTPUT B for PMP980S/PMP1680S and PMP960M, including mode-specific signal routing and bridge mode.
Description of the built-in effects module, its capabilities, and how to add dry signals.
Instructions for mains connection, including fuse replacement and ensuring proper grounding.
Details on unbalanced 1/4" TS and balanced XLR connectors for inputs and outputs, and RCA connectors for tape.
Information on high-quality twist-lock connectors for safe and reliable loudspeaker operation.
Table detailing pin connections for loudspeaker outputs on PMP980S/PMP16805 and PMP960M.
Illustrations showing connector assignments for speaker outputs and impedance loads.
Technical specifications for microphone inputs, including EIN, frequency response, gain, and impedance.
Specifications for loudspeaker outputs, including connector type and load impedance for different modes.
Detailed output power specifications for PMP960M, PMP980S, and PMP1680S in various impedance and mode configurations.
