Need help?Do you have a question about the Behringer EUROPOWER PMP500 and is the answer not in the manual?
Power| mains voltage | 100-120 V~ (for UL, JP, CA); 220-240 V~ (for EU, AU, UK, CN) |
|---|---|
| power consumption | 90 W |
| phantom power | +15 V |
Amplifier| max output power | 250 W + 250 W |
|---|---|
| load impedance | 4-8 Ω |
| impedance | Approx. 20 kΩ balanced, 10 kΩ unbalanced |
Weight and Dimensions| dimensions | 4.8 x 15.4 x 16.7" / 122 x 390 x 425 mm |
|---|---|
| weight | 14 lbs / 6.3 kg |
Essential safety precautions for operating and maintaining the audio equipment.
Guidelines to prevent electrical shock and fire hazards during use.
Statement regarding product specifications, trademarks, and liability.
Details on warranty terms, conditions, and how to claim service.
Guide to making the initial audio and speaker connections for the mixer.
Illustrations showing different hook-up configurations for the mixer.
Introduction to the mixer's control panel and rear panel inputs.
Detailed explanations of channel input, EQ, dynamics, and effect controls.
Functions for effect parameters, monitor sends, and main mix outputs.
Details on special inputs, output selectors, and level meters.
Instructions for powering on, setting modes, and adjusting initial channel levels.
Steps for adding effects and engaging feedback detection.
Fine-tuning effects and managing feedback frequencies.
Reference chart for available effects, parameters, and their adjustable ranges.
Detailed technical data for inputs, outputs, power, and physical dimensions.
Comprehensive specifications listed by category (Microphone, Line, EQ, etc.).
Guidance on registering the product and seeking technical support.
Details on compliance with Federal Communications Commission rules.
To Next Page
