Behringer Europower PMP4000 - PMP4000 Output Power Specifications; PMP4000 Power Supply and Consumption; PMP4000 Microphone Input Specifications; PMP4000 Line Input and Equalizer Specs

19 EUROPOWER PMP6000/PMP4000/PMP1000 User Manual
Output Power
RMS @ 1% THD, Both Channels Driven:
8 Ohm per channel 300 W
4 Ohm per channel 600 W
RMS @ 1% THD, Bridged Mode:
8 Ohm 1200 W
Peak Power, Both Channels Driven:
8 Ohm per channel 400 W
4 Ohm per channel 800 W
Peak Power, Bridged Mode:
8 Ohm 1,600 W
Power Supply
Mains Voltage
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 10 A H 250 V
Fuse 220 - 240 V~ T 6.3 A H 250 V
Power Consumption
Power consumption 1,050 W
Mains connector IEC standard receptacle
Dimensions/Weight
Dimensions (H x W x D) 4.8 x 19.5 x 23.5"
122 x 496 x 596 mm
Weight 28.9 lbs / 13.1 kg
PMP4000
Microphone Inputs
Type XLR, electronically balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance -134 dB / 136 dB A-weighted
@ 50 Ohm source resistance -131.5 dB / 134 dB A-weighted
@ 150 Ohm source resistance -129 dB / 155 dB A-weighted
Frequency response < 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +10 dB, +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kOhm balanced
approx. 1.3 kOhm unbalanced
Signal-to-noise ratio 109 dB / 112 dB A-weighted
(0 dBu In @ +10 dB gain)
Noise (THD + N) 0.002% / 0.0018% A-weighted
Mono Line Inputs
Type ¼" TS connectors, balanced
Impedance approx. 20 kOhm
Max. input level +21 dBu
Stereo Line Inputs
Type ¼" TRS connectors, unbalanced
Impedance > 3.6 kOhm
Max. input level +22 dBu
Equalizer
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
2 Track Input
Type RCA
Impedance approx. 3.6 kOhm