31
Specications
B115W B112W
Amplier
Low-Frequency Range
Max. output power 700 W*
High-Frequency Range
Max. output power 300 W*
Audio Inputs
XLR (Servo-Balanced)
Sensitivity -36 dBu to 0 dBu
Input impedance 24 k
¼" TRS Jack (Servo-Balanced)
Sensitivity -36 dBu to 0 dBu
Input impedance 24 kΩ
Wireless System
USB dongle (not included) USB socket accepts signals from 2 independent Behringer ULM mics
Signal indicator LED 2 (green)
Bluetooth**
Frequency range 2402 MHz ~ 2480 MHz
Channel number 79
Version Bluetooth spec V2.1+EDR compliant
Output power class Class 2 type output power
Compatibility Supports A2DP 1.2 proles
Audio Outputs
Mix Output
Connector XLR, balanced
Level Control
Input trim -∞ to +36 dB
Max. input level 18 dBu
Loudspeaker System Data
Frequency response 45 Hz to 20 kHz 50 Hz to 20 kHz
Crossover frequency 2.2 kHz 2.8 kHz
Limiter Optical
Equalizer
High ±15 dB @ 12 kHz
Low ±15 dB @ 80 Hz
Power Supply / Voltage (Fuses)
USA / Canada / Japan 100-120 V~, 50/ 60 Hz (T 6.3A H 250 V)
UK / Australia / Europe / China 220-240 V~, 50/ 60 Hz (T 3.15A H 250 V)
Power consumption @ ⁄ rated power 110 W
Mains Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) 713 x 427 x 313 mm (28.1 x 16.8 x 12.3") 568 x 342 x 270 mm (22.4 x 13.5 x 10.6")
Weight 17.7 kg (38.9 lbs) 12.5 kg (27.5 lbs)
*Independent of limiters and driver protection circuits
**The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by MUSIC Group is under license.
Bluetooth audio streaming performance and range vary by make and model of smart phone and can be affected by Wi-Fi networks or wireless microphones such as the Behringer ULTRALINK.
Avoid use of Bluetooth audio streaming where such devices are in use.