Need help?Do you have a question about the Behringer TRUTH B1031A and is the answer not in the manual?
General| Product color | Silver, Yellow |
|---|---|
| LED indicators | Power |
| Housing material | - |
| Recommended usage | Other |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Speaker type | 2-way |
| Speaker placement | Floor, Tabletop/bookshelf, Wall-mountable |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 8 \ |
| Tweeter diameter (imperial) | 1 \ |
| Impedance | - Ω |
| Frequency range | - Hz |
| RMS rated power | 100 W |
| Connectivity technology | Wired |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
Adjusts the speaker's input sensitivity to the audio source signal.
Adapts the speaker's frequency response to the control room damping characteristics.
Connect the supplied power cord to this socket and to the main power outlet.
Contains the fuse.
Adapts the speaker for use with a subwoofer system or simulates the characteristics of a smaller speaker.
Provides a low frequency roll-off to compensate for speaker placement.
Connect power, audio source, adjust INPUT TRIM, and set volume.
To Next Page
