Behringer EUROPOWER EP2000 User Manual (English)

To Next Page

ENGLISH

This manual is available in English, German, French,

Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,

Danish, Portugese, Greek, Japanese and Chinese. There may

also be more current versions of this document. Download them

by going to the appropriate product page at:

www.behringer.com

A50-A3830-08001

User Manual

EUROPOWER

EP2000/EP4000

Professional 2,000-Watt

and 4,000-Watt Stereo Power

Ampliﬁer with ATR

(Accelerated Transient

Response) Technology

Thank you

Thank you for choosing a BEHRINGER EUROPOWER ampliﬁer.

This piece of high-end gear was developed for professional use

in live applications, and its many features make it a useful and

dependable part of your sound system.

The EUROPOWER amps feature an input ﬁlter for each channel,

enabling you to remove the low-frequency portion of the

signal, if desired. Additionally, there is a limiter that protects

your loudspeakers. Various operating modes, such as parallel or

mono-bridged mode, open up various possibilities for eﬀective

implementation with the rest of your audio equipment for almost

any application.

This manual ﬁrst describes the controls and connection points

so that you fully understand the EUROPOWER ampliﬁer and its

functions. Then it delves into the various applications where the

EUROPOWER amp can be used, and ﬁnishes with more details on

installing and making the connections to the ampliﬁer.

Have fun with your new ampliﬁer.

Table of Contents

Thank you ..................................................................... 1

Important Safety Instruction ..................................... 2

1. Introduction ............................................................ 3

1.1 Before you get started ..................................................................3

2. Control elements .................................................... 4

2.1 Front panel ........................................................................................4

2.2 Rear panel ..........................................................................................4

2.3 Conﬁguration switches (MODE SWITCHES) .......................5

3. Applications ............................................................ 6

3.1 Diﬀerences between 2-channel, parallel and

mono-bridged operating modes ...................................................6

3.2 Bi-amping ...........................................................................................9

4. Installation ............................................................. 10

4.1 Connections ...................................................................................10

4.2 Audio connections ......................................................................11

5. Speciﬁcations ........................................................ 12

Legal Disclaimer ........................................................ 13

Warranty ..................................................................... 14

Other manuals for Behringer EUROPOWER EP2000

Brochure & Specs4 pages

Quick Start Guide21 pages

Need help?

Do you have a question about the Behringer EUROPOWER EP2000 and is the answer not in the manual?

Behringer EUROPOWER EP2000 Specifications

General

Gain	34 dB
Damping factor	300
Amplifier class	-
Frequency range	20 - 20000 Hz
Audio output channels	- channels
Peak power per channel	2000 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.01 %
LED indicators	Yes
Speakers connectivity type	1/4\
Purpose	Performance/stage
Cooling type	Active
Product color	Black
Connectivity technology	Wired
Maximum current	15 A
AC input voltage	100 - 120 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	1600 W