Behringer Europower EP2500 - Page 3

EUROPOWER EP1500/EP2500
3
EP1500/EP2500
EUROPOWER
Power amplifier with 2 x 700 or 2 x 1200 Watts
2x700 WATTS POWER AMPLIFIER
2x1200 WATTS POWER AMPLIFIER
EP1500: 2 x 700 Watts into 2 Ohms; 1,400 Watts into 4 Ohms bridged operation =
EP2500: 2 x 1,200 Watts into 2 Ohms; 2,400 Watts into 4 Ohms bridged operation =
2-channel, parallel or bridged mono operating modes for exible application =
Independent limiters for each channel offer dependable protection against distortion =
Precise signal and clip LED indicators to monitor performance =
Selectable low-frequency lters (30 Hz or 50 Hz) remove distracting infra-sound frequencies =
Professional connectors, compatible with Neutrik Speakon connectors, and "touch-proof" binding =
post loudspeaker outputs enable secure operation
Balanced XLR and 1/4" TRS inputs =
Connection option for extra amps in parallel operation =
Ultra-reliable Toshiba/Fairchild high-power transistors =
High-current toroidal transformer for absolute reliability and lowest noise emission =
“Back-to-front” ventilation system including air lter with automatically adjusting fan speed for smooth =
operation
Independent DC and thermal overload protection on each channel automatically protects amplier =
and speakers
High-quality components and exceptionally rugged construction ensure long life =
Conceived and designed by BEHRINGER Germany =
All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN and EUROPOWER) mentioned belong to their respective owners and are not afliated with
BEHRINGER.