Behringer Europower PMH660M - Page 3

3
EUROPOWER PMH660M
SPECIFICATIONS
PMH660M
Type XLR, electronically balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0
Ω
source resistance
-112 dB / 114 dB A-weighted
@ 50
Ω
source resistance
-112 dB / 114 dB A-weighted
@ 150 Ω source resistance -112 dB / 114 dB A-weighted
Frequency response < 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +30 dB, +10 dB with pad
Max. input level +12 dBu @ +10 dB gain
Impedance
approx. 2.2 k
Ω
balanced / 1.1 k
Ω
unbalanced
Signal-to-noise ratio 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain)
Noise (THD + N) 0.001% / 0.0007% A-weighted
Type 1/4" TS connectors, balanced
Impedance approx. 20 kΩ, balanced
Max. input level +21 dBu
Low 80 Hz / +/-15 dB
Mid 2.5 kHz / +/-15 dB
High 12 kHz / +/-15 dB
Type RCA
Impedance approx. 10 k
Ω
MAIN
Type 1/4" TS connectors, unbalanced
Impedance approx. 150
Ω,
unbalanced
Max. output level +21 dBu
MONITOR
Type 1/4" TS connectors, unbalanced
Impedance
approx. 150
Ω,
unbalanced
Max. output level +21 dBu
Type RCA, mono output
Impedance
approx. 1 k
Ω
Max. input level +21 dBu
Noise
MAIN MIX @ -oo -102 dB/-106 dB A-weighted
Channel fader -oo
MAIN MIX @ 0 dB -88 dB/-91 dB A-weighted
Channel fader -oo
MAIN MIX @ 0 dB -84 dB/-86 dB A-weighted
Channel fader @ 0 dB
Type
NEUTRIK
®
SPEAKON
®
-compatible
Load impedance
MONITOR/MAIN MONO 4 - 8
Ω
MAIN MONO/MAIN MONO
4 - 8
Ω
BRIDGE 8 - 16 Ω
PREAMP OUTPUTS
STEREO OUTPUTS
MAIN MIX SYSTEM DATA
LOUDSPEAKER OUTPUTS
MICROPHONE INPUTS
MONO LINE INPUTS
EQUALIZER
2 TRACK INPUT