Behringer EURORACK UB1202FX - Specifications

13 EURORACK UB1202FX/UB1002FX User Manual
Line Input
Type ¼" TRS connector
electronicallybalanced
Impedance approx. 20 kΩ balanced
approx. 10kΩunbalanced
Gain range -10 to +40 dB
Max. input level +20 dBu @ 0 dB Gain
Fade-Out Attenuation
1
(Crosstalk Attenuation)
Main fader closed 85 dB
Channel fader closed 88 dB
Frequency Response
Microphone Input to Main Out
<10 Hz - 80 kHz +0 dB / -1 dB
<10 Hz - 137 kHz +0 dB / -3 dB
Stereo Inputs
Type ¼" TRS connector,
electronically balanced
Impedance approx. 20 kΩ bal. / 10kΩ unbal.
(+4 dBu operating level)
approx. 20 kΩ bal. / 5kΩ unbal.
(-10 dBV)
Max. input level +22 dBu
EQ Mono Channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Audio Outputs
FX Send
Type ¼" TRS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Main Outputs
Type ¼" TRS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Control Room Outputs
Type ¼" TRS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones Output
Type ¼" TRS connector, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
Main Mix System Data
2
Noise
Main mix @ -∞, -105 dB / -108 dB A-weighted
Channel fader -∞
Main mix @ 0 dB, -94 dB / -97 dB A-weighted
Channel fader -∞
Main Mix @ 0 dB, -83 dB / -85 dB A-weighted
Channel fader @ 0 dB
FX Section
Converter 24-Bit Sigma-Delta
Sampling rate 40 kHz
Mains Voltage
USA/Canada 120 V~, 60 Hz, MXUL6 adapter
U.K./Australia 240 V~, 50 Hz, MXUK6 adapter
Europe 230 V~, 50 Hz, MXEU6 adapter
China 220 V~, 50 Hz, MXCN6 adapter
Japan 100 V~, 60 Hz, MXJP6 adapter
Dimensions
UB1202FX
Dimensions (H x W x D) approx. 1 ⁄ / 1 ½ x 8 ⁄ x 9 ½"
approx. 47 / 37 x 220 x 242 mm
Weight (net) approx. 4.58 lbs / 2.08 kg
UB1002FX
Dimensions (H x W x D) approx. 1 ⁄ / 1 ½ x 7 ⁄ x 8 ⁄"
approx. 47 / 37 x 189 x 220 mm
Weight (net) approx. 4.53 lbs / 2.06 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix;
channels
¹
⁄
₃
as far left as possible, channels
²
⁄
₄
as far right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.