the MIDI THRU allows you to loop through MIDI data.
(22) Use the OPERATING LEVEL switch to change from home recording level (-10 dBV) to studio-level (+4 dBu),
and vice versa. The level meters are adapted automatically to the selected nominal level so that the FEEDBACK
DESTROYER PRO will always work in its optimum operating range.
(23) INPUT LEFT/RIGHT These are the balanced inputs of your FBQ2496. They are laid out as ¼” TRS and XLR
connectors.
(24) OUTPUT LEFT/RIGHT Both of the FBQ2496 outputs are also laid out as balanced ¼” TRS and XLR
connectors.
Specifications
Audio Inputs
Connections – XLR and ¼” TRS stereo connector
Type – electronically balanced input
Input impedance – approx. 20 k balanced
Nominal input level – -10 dBV / +4 dBu (adjustable)
Max. input signal level – +20 dBu at +4 dBu nominal level, +6 dBV at -10 dBV nominal level typically -40 dB
Audio Outputs
Connections – XLR and ¼” TRS stereo connector
Type – balanced
Output impedance – approx. 200 balanced
Max. output level – +20 dBu at +4 dBu nominal level, +6 dBV at -10 dBV nominal level
Bypass
Type – Relay, a hard bypass in case of a power outage
System Information
Frequency response – <10 Hz to 44 kHz
Dynamic range – 107 dB
THD – 0.007 % typically @ +4 dBu, 1 kHz, amplification 1
Crosstalk – < -100 dB @ 1 kHz
MIDI Interface
Type – 5-pole DIN connectors IN/OUT/THRU
Digital Processing
Converter – 24 Bit / 96 kHz
Sample rate – 96 kHz
Parametric Equalizer (PEQ)
Type – max. 20 independent, fully parametric filters per channel
Frequency range – 20 Hz to 20 kHz
Bandwidth – 1/60th to 10 octaves
Possible value range – +15 to -36 dB
Feedback Destroyer (FBQ)
Type – digital signal analysis for feedback recognition purposes
Filter – max. 20 digital notch filters per channel
Frequency range – 20 Hz to 20 kHz
Bandwidth – 1/60th octave
Possible value range – 0 to -36 dB
Display
Type – 3-digit numeric LED display
Power Supply
Mains voltage – 100 – 240 V~, 50 – 60 Hz
Power consumption – approx. 10 W
To Next Page
Loading...
