Behringer FEEDBACK DESTROYER PRO FBQ2496 - Technical Specifications; Audio, Filter, and Processing Specifications

14 FEEDBACK DESTROYER PRO FBQ2496 User Manual
9. Specications
Audio inputs
Connections XLR and ¼" TRS stereo connector
Type electronically balanced input
Input impedance approx. 20 kΩ balanced
Nominal input level -10 dBV / +4 dBu (adjustable)
Max. input signal level +20 dBu at +4 dBu nominal level,
+6 dBV at -10 dBV nominal level
typically -40 dB
Audio outputs
Connections XLR and 1/4” TRS stereo connector
Type balanced
Output impedance approx. 200 Ω balanced
Max. output level +20 dBu at +4 dBu nominal level,
+6 dBV at -10 dBV nominal level
Bypass
Type Relay, hard bypass in case of
power outage
System information
Frequency response <10 Hz to 44 kHz
Dynamic range 107 dB
THD 0.007 % typically @ +4 dBu, 1 kHz,
amplication 1
Crosstalk < -100 dB @ 1 kHz
MIDI interface
Type 5-pole DIN connectors IN/OUT/THRU
Digital processing
Converter 24 Bit / 96 kHz
Sample rate 96 kHz
Parametric equalizer (PEQ)
Type max. 20 independent,
fully parametric lters per channel
Frequency range 20 Hz to 20 kHz
Bandwidth 1/60th to 10 octaves
Possible value range +15 to -36 dB
Feedback Destroyer (FBQ)
Type digital signal analysis for feedback
recognition purposes
Filter max. 20 digital notch lters per channel
Frequency range 20 Hz to 20 kHz
Bandwidth 1/60th octave
Possible value range 0 to -36 dB
Display
Type 3-digit numeric LED display
Power supply
Mains voltage 100 - 240 V~, 50 - 60 Hz
Power consumption approx. 10 W
Fuse T 1 A H 250 V
Mains connector Standard receptacle
Dimensions/weight
Dimensions (H x W x D) approx. 217 x 44.5 x 483 mm
approx. 8.5 x 1.75 x 19"
Weight approx. 2 kg / 4.4 lbs
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.