Need help?Do you have a question about the Behringer HA4600 and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Channels | 4 |
| Output Connectors | 1/4" TRS |
| Inputs | 4 |
| Outputs | 4 |
| Input Impedance | 10 kOhms |
| Form Factor | Rackmount |
| Rack Spaces | 1U |
| Total Harmonic Distortion (THD) | 0.005% typical @ +4 dBu |
| Signal-to-Noise Ratio | >90dB |
| Input Connectors | 1/4" TRS |
| THD | 0.005% typical @ +4 dBu |
| Signal to Noise Ratio | >90dB |
| Controls | Volume per channel |
| Dimensions | 19" x 1.75" x 5.5" |
Initial setup steps, damage check, and warranty registration procedure.
Detailed guide to the front panel controls, buttons, knobs, and displays.
Explanation of rear panel connectors, including power input and audio I/O.
Connecting main audio sources for headphone distribution.
Mixing additional signals into main inputs for monitoring or playback.
Bypassing main inputs to connect external audio sources directly.
Switching channels to mono for specific audio monitoring requirements.
Using mute switches to control individual left/right channel audio.
Guidelines for connecting multiple headphones to the unit's outputs.
Details on headphone, AUX IN, DIRECT IN jacks, and XLR/1/4" TRS connectors.
To Next Page