Behringer MicroMIX MX400 - Important Safety Instructions; Electric Shock and Voltage Hazard Warnings; Safe Operation and Maintenance Guidance

4
MICROMIX MX400
4 MICROMON MA400
Terminals marked with this
symbol carry electrical current
of sucient magnitude
to constitute risk of electric shock.
Use only high-quality professional
speaker cables with ¼" TS or
twist-locking plugs pre-installed.
Allother installation or modication
should be performed only by
qualiedpersonnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated dangerous
voltage inside the enclosure - voltage
that may be sucient
to constitute a risk ofshock.
This symbol, wherever
it appears, alerts you
to important operating and maintenance
instructions in the accompanying
literature. Please read themanual.
Caution
To reduce the risk of electric
shock, do not remove the top cover (or
the rear section). No user serviceable
parts inside. Refer servicing to
qualiedpersonnel.
Caution
To reduce the risk of re
or electric shock, do not expose
this appliance to rain and moisture.
Theapparatus shall not be exposed to
dripping or splashing liquids and no
objects lled with liquids, such as vases,
shall be placed on the apparatus.
Caution
These service instructions are
for use by qualied service personnel
only. Toreduce the risk of electric
shock do not perform any servicing
other than that contained in the
operation instructions. Repairshave
to be performed by qualied
servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including ampliers)
that produce heat.
Important Safety
Instructions