To Next PageTo Next Page
Need help?Do you have a question about the Behringer MicroMIX MX400 and is the answer not in the manual?
General| Inputs | 4 x 1/4'' TS |
|---|---|
| Outputs | 1 x 1/4'' TS |
| Power Supply | 12 V DC adapter |
| Dimensions | 4.7 x 2.5 x 1.2 inches |
| Weight | 0.5 lbs |
| Frequency Response | 20Hz - 20kHz |
Describes the 12V power input and 1/4" TS input/output connectors.
Explains the use of LEVEL controls for setting output level of each channel.
Details the ON LED status and location of the serial number.
Illustrates an example of connecting keyboards to the MicroMIX MX400.
Warns about electric shock risk from terminals and uninsulated voltage inside the unit.
Advises following operating instructions and cautions regarding fire/shock and servicing.
Covers proper plug usage, power cord protection, and using specified accessories.
Details safe handling, unplugging during storms, and servicing by qualified personnel.
Advises on mains connection, disconnect device operability, and proper product disposal (WEEE).
Warns against confined spaces and placing open flames near the apparatus.
Mentions environmental battery disposal and operating temperature limits.
Details the type, impedance, and maximum input/output levels for the unit.
Specifies the power supply requirements and operating voltage ranges for different regions.
Lists the physical dimensions and weight of the MX400.
States Music Tribe's non-liability and lists trademark ownership.
Directs users to online resources for applicable warranty terms and conditions.
Lists EU directives and regulations the product complies with.
Provides contact details for EU and UK representatives.
