Behringer Miniamp AMP800 User Guide

Type ¼” TRS connector, stereo
Impedance min. 100 Ω
Max. output level +13 dBu @ 100 Ω load
System Specifications
Frequency
response
10 Hz to 120 kHz, -3 dB
Dynamic range
108 dB, 10 Hz to 22 kHz (100
Ω load)
Distortion 0.007% typ. (100 Ω load)
Crosstalk < 80 dBu @ 1 kHz
Signal-to-noise
ratio
10 Hz to 22 kHz < 95 dB @ 0
dBu, a-weighted
Mains Voltage
USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
China 220 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz
Power consumption 11 W
Other important information
1. Register online.
Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com.
Registering your purchase using our simple online form helps us to process your repair claims more quickly and
efficiently. Also, read the terms and conditions of our warranty, if applicable.
2. Malfunction.
Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe
Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be
listed, please check if your problem can be dealt with by our “Online Support” which may also be found under
“Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com
BEFORE returning the product.
3. Power Connections.
Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your
particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
To prevent possible hearing damage, do not listen at high volume levels for long periods. As a guide to setting the
volume level, check that you can still hear your own voice, when speaking normally while listening with the
headphones.
Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU,
Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and
Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

Behringer Miniamp AMP800 Specifications

General

Frequency range	10 - 120000 Hz
Output impedance	100 Ω
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %
Headphone connectivity	6.3mm
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	11 W
Product color	Aluminum
LED indicators	Yes

Weight and Dimensions

Depth	120 mm
Width	242.6 mm
Height	48 mm
Weight	770 g