12
MINIMIC MIC800
4. AUDIO CONNECTIONS
4. AUDIO CONNECTIONS
This chapter provides details about the plugs that you can use to connect microphones and other
audio equipment to the MIC800.
For microphones
To connect microphones to the MIC800, use a microphone cable that includes balanced XLR plugs.
The following illustrates the MIC800 connector (Input) and the corresponding XLR plug (Output):
Fig. 4.1: Balanced XLR connector and plug
For other audio equipment
To connect instruments and other types of equipment to the MIC800, use ¼" TS or ¼" TRS plugs,
illustrated as follows. For details about MIC800 connectors, see 2.3 Rear panel.
Fig. 4.2: Patch cord with unbalanced, ¼" TS plugs
Fig. 4.3: Patch cord with balanced, ¼" TRS plugs
To Next Page
Loading...
