29 MOTÖR 61 / MOTÖR 49 User Manual
10. Using Presets
The menu displays allow you to select and make adjustments to the parameters
of your MOTÖR keyboard controller, and to customize it to suit your preferences.
The Preset features allow you to save your settings and recall them at any time.
The following procedures describe how to save, recall, delete, and rename
presets.
◊ Note that the presets contain the internal settings that you make using
the MOTÖR display menu structure, and do not contain any settings
that you make within your DAW. (These would be created and saved
using your DAW's own preset load/save functions.)
Intially, the MOTÖR keyboard comes with one DEFAULT factory preset, and 64
empty memory spaces where your user presets can be saved. The DEFAULT
factory preset is 0, and the user presets are numbered 1 through 64.
10.1 Quickly Loading Presets
1. Press the PRESET button to show the main display and the currently loaded
preset. This one is the DEFAULT preset 0.
2. To scroll through the available presets, press the DATA knob, and then rotate
it. All available previously-stored presets will be shown as you rotate the
knob, including the DEFAULT preset 0. Note that you cannot scroll through
empty presets, and they are not shown. So if you have not made any presets,
then only the DEFAULT preset will be shown. When you reach a desired
preset, press the DATA knob again and it will be quickly loaded.
◊ The use of the PRESET button and the DATA knob is the recommended
way to load presets. (There is another way if you are in the
EDIT>PRESETS>PRESET OVERVIEW menu, but this first method is the
easiest.)
10.2 The EDIT>PRESETS Menu
1. Press the EDIT button to enter the EDIT menu.
2. The display will show 5 menu items:
3. Rotate the DATA knob to highlight item 1. PRESETS, and press the DATA knob
to bring up the PRESETS menu. This is the main edit menu for working with
presets, allowing you to save, copy, delete, rename, and so on.
These features are described in the following pages.
To Next Page
Loading...
