Behringer MOTOR 61 - 7. MC Mode Assignment Table

16 MOTÖR 61 / MOTÖR 49 User Manual
7. MC Mode Assignment Table
This table shows the operation of the various controls in MC mode. The silkscreened text on the MOTÖR top surface shows the standard MIDI operation, whereas some of the
assignments change when you are using MC mode, such as the Fader Bank buttons and Encoder Bank buttons.
MOTÖR MC
Faders 1-8 Faders 1-8
Master Fader (9) Master Fader (9)
Encoders 1-8 V-Pots 1-8
Pads 1-8
No MC mode assignment
(Pads keep the original assignments from the “Standard MIDI Mode”)
Transport Section (<<, >>, Stop, Play, Loop, Rec) Transport Section (<<, >>, Stop, Play, Cycle, Rec)
Sustain Pedal User Switch 1 (rear input)
Expression Pedal External Control (rear input)
Pitch Bend Wheel No MC Mode assignment (keeps “Pitch Bend”)
Modulation Wheel No MC Mode assignment (keeps original assignment from “Standard MIDI Mode”)
Fader Banks 1-8 V-POT Assign Track
Fader Banks 9-16 V-POT Assign Send
Fader Banks 17-24 V-POT Assign Pan/Surround
Fader Banks 25-32 V-POT Assign Plug-IN
Encoder Banks 1-8 V-POT Assign EQ
Encoder Banks 9-16 V-POT Assign Instrument
Encoder Banks 17-24 FADER BANKS Bank <
Encoder Banks 25-32 FADER BANKS Bank >
Pad Banks 1-8 No MC Mode assignment (same function as in “Standard MIDI Mode”)
Pad Banks 9-16 No MC Mode assignment (same function as in “Standard MIDI Mode”)
Pad Banks 17-24 No MC Mode assignment (same function as in “Standard MIDI Mode”)
Pad Banks 25-32 No MC Mode assignment (same function as in “Standard MIDI Mode”)
Keys + all other buttons/controls No MC mode assignment
The actual MC-Mode functions of the Fader Bank buttons and Encoder Bank buttons are shown in the drawing on the next page: