18 MOTÖR 61 / MOTÖR 49 User Manual
8.2 Installation Example
Ableton Live 9 (9.6.1)
Mac OS X (El Capitan, 10.11.3)
1. Power on your MOTÖR keyboard.
2. Connect it to your Mac via USB cable.
3. Press the MC button on your MOTÖR keyboard.
4. Start Ableton LIVE.
5. Select Live > Preferences…
6. Go to the MIDI tab.
For “Control Surface” select MackieControl
For "Input" select MOTÖR49 Keyboard (Anschluss 2) (Port 2)
7. For “Output” select MOTÖR49 Keyboard (Anschluss 2) (Port 2).
Switch all MOTÖR-related MIDI Ports On.
8. Please note that MIDI tracks which have no instrument assigned will make
no use of the faders. If you move it up on your MOTÖR, it will fall down again.
If you insert an instrument, a virtual fader will appear on the screen which
can be controlled from the MOTÖR hardware.
Now you can control your DAW as explained on section 8.1 (General Information).
An important note about motor fader control:
◊ For best operation with the motor faders, we recommend that you do
not move more than 4 faders simultaneously, and that you should first
touch the fader before you start moving. More details about the motor
fader operation can be found in chapter 9.
To Next Page
Loading...
