Behringer STUDIO CONDENSER MICROPHONES C-2 - Technical Specifications

23 STUDIO CONDENSER MICROPHONES C-2 User Manual
9. Specications
Transducer type condenser, 16 mm (0.63'')
Operating principle pressure gradient
Polar pattern cardioid
Connector gold-plated balanced XLR connector
Open circuit sensitivity (@1kHz) −41dBV (0dBV = 1V/Pa)
Frequency response 20Hz to 20kHz
level attenuation −10dB, switchable
Low-cut lter 6dB/oct.@120Hz (switchable)
Max. SPL (≤1%THD@1kHz) 140dB (0dB), 150dB (−10dB)
Equivalent noise level (IEC651) 19dBA
Signal-to-noise ratio 75dB
Nominal impedance 75Ω
Load impedance > 1kΩ
Mains Voltage/Fuse
Supply voltage +48V
Supply current 3mA
Physical/Weight
Dimensions shaft:0.8" / 20mm
length:3.7" / length:94mm
Weight approx. 0.2lbs / 0.09kg