13
ULTRATWIN GX210
Fig. 2.1: Standard setup
2.2 Expanded setup with MIDI foot controller, playback source and mixing console
To use your ULTRATWIN for advanced applications, please consider the following suggestions. Of course, the
expanded configuration suggested in fig. 2.2. builds on the standard setup described in chapter 2.1.
Use the MIDI foot controller to change presets and/or channels, set volume and wah, etc. The line out signal
can be fed into a P.A. or recording console, and the AUX input can be used to play back e.g. cassette recorder
signals through the GX210.
Fig. 2.2: Expanded setup
2. WIRING EXAMPLES
To Next Page
Loading...
