Behringer ULTRAZONE ZMX8210 - Application; Examples of application; Using multiple ZMX8210 s

32 ULTRAZONE ZMX8210
Specications
Inputs 1 – 6
Type Euroblock connector, balanced
Impedance 5 kΩ balanced, 2.5 kΩ unbalanced
Maximum input level +12 dBu (with Pad)
Maximum gain 40 dB
Pad -20 dB
Crosstalk -63 dB @ 1 kHz
Common-mode
rejection ratio (CMRR)
> 70 dB @ 1 kHz, 22 Hz – 22 kHz
Equivalent input
noise (EIN)
-116 dBu, A-weighted;
terminated with 150 Ω
Inputs 7 – 8
Type RCA connector, unbalanced
Impedance 20 kΩ, unbalanced
Maximum input level +10 dBu
Maximum gain 13 dB
Out L / Out R / Aux
Type Euroblock connector, balanced
Impedance 120 Ω balanced, 60 Ω unbalanced
Max. gain 18 dB
Max. gain (input / output) 58 dB (without Pad)
Maximum output level +21 dBu
Crosstalk
(output / output)
-63 dB @ 1 kHz
Noise (All level
controls down)
-105 dBu, A-weighted
Signal-to-noise ratio 87 dB @ 0 dB, A-weighted
Bus Links
Type Euroblock connector, unbalanced
Impedance 2.7 kΩ
Maximum output level +14 dBu
Remote
Type Euroblock connector
Volume control "30 dB attenuation with
10 kΩ potentionmeter (not included)
60 dB attenuation with
100 kΩ potentionmeter (not included)"
Channel select 7 / 8 Push-button switch required (not included)
Equalizer Section
Mic low cut 100 Hz, 18 dB/oct. high-pass lter, Butterworth
Low ±15 dB @ 70 Hz, shelving
Low mid ±15 dB @ 300 Hz
High mid ±15 dB @ 3 kHz
High ±15 dB @ 10 kHz, shelving
System Specications
Frequency response 20 Hz to 22 kHz, ±0.5 dB
Distortion (THD+N) < 0.05 %
Power supply, Voltage, Current Consumption
Switch mode
power supply
Autorange, 100-240 V~ 50/60 Hz
Power consumption 15 W
Main connection Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) 44 x 483 x 153 mm (1.7 x 19.0 x 6.0")
Weight 1.7 kg (3.7 lbs)