Skip to content
Manuals+
User Manuals Simplified.
behringer Guitar Driver Direct Recording Preamp User Manual
Home » Behringer » behringer Guitar Driver Direct Recording Preamp User Manual
V-TONE GUITAR DRIVER DI GDI21
Guitar Amp Modeler/Direct Recording Preamp/DI Box
Thank you for showing your confidence in us by purchasing the V-TONE GUITAR GDI21. This high-quality guitar modeling driver is designed for hands-on musicians and no-frills types.
We have rebuilt different circuitries and components from famous amps, and packed them into one housing. You can alternate between several different amp re-creations, gain settings
and mic placements with a flick of a switch–intuitively and with minimal effort. In addition, the GDI21 functions as standard ultra-transparent direct injection box when used in bypass mode.
A DI (Direct Injection) box allows you to send a signal directly from an unbalanced, high-impedance output (like an electric guitar) and connect it directly to the balanced mic input of a
mixing console.
Whether for stage, recording, rehearsal or warm-up, BEHRINGER’s V-TONE GUITAR GDI21 is a natural choice for all players who want an arsenal of different tones.
Contents [ hide
1 Control Elements
2 Safety
Instructions
3 Warranty
4 Specifications
5 Sample Settings
6 File Downloads
7 References
8 Related Manuals
Control Elements
Control elements
1. The DRIVE control adjusts the overall amount of gain and overdrive, similar to pushing the output section of a tube amp.
2. The TREBLE control governs the high-frequency range of the signal (±12 dB).
3. The BASS control allows you to boost/cut the low-frequency range (±12 dB).
4. The LEVEL control adjusts the output level of the GDI21.
5. Use the AMP switch to select one of three great classic tube amps. You will recognize these classic amp tones as soon as you hear them. For crystal-clear, transparent sounds with
To Next Page
Need help?
General
