Need help?Do you have a question about the Behringer V-Verb Pro REV2496 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Sampling Rate | 48 kHz |
| A/D Resolution | 24-bit |
| D/A Resolution | 24-bit |
| Bit Depth | 24-bit |
| Effects | Reverb, Delay |
| Inputs | 2 x XLR, 2 x 1/4" TRS |
| Outputs | 2 x XLR, 2 x 1/4" TRS |
| Digital Inputs | 1 x AES/EBU, 1 x S/PDIF |
| Digital Outputs | 1 x AES/EBU, 1 x S/PDIF |
| Type | Digital Reverb Processor |
| MIDI | In/Out |
| Dimensions | 1.75" x 19" x 8.5" (44.5 x 482.6 x 217 mm) |
Comprehensive safety guidelines and precautions for operating the device.
Details of the controls and displays on the front panel of the REV2496 unit.
Description of the connectors and ports located on the rear panel of the unit.
Overview of methods for customizing presets: simple, extensive, and graphical editing.
Access to global settings like I/O, digital, gain, and MIDI configuration.
Detailed explanation of the V-Verb algorithm, its parameters, and effect configuration.
Describes three similar reverb algorithms and their unique early reflection patterns.
Explains the Gold Plate algorithm, suitable for drums and percussion, with four-fold delay.
Details three distinct effect types based on the same algorithm: ambience, gated, and reverse reverb.
Explains the extensive delay algorithm with its two independent stereo delays and EQ.
Describes the crossover delay that splits the signal into bass, mids, and highs for separate delay processing.
Covers the complex compressor algorithm with its modes, side chain filters, and transient bypass.
To Next Page
