Need help?Do you have a question about the Behringer Autocom MDX 1200 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Maximum Input Level | +22 dBu |
| Maximum Output Level | +22 dBu |
| Input Connectors | XLR and 1/4" TRS |
| Output Connectors | XLR and 1/4" TRS |
| Input Impedance | 10 kΩ |
| Sidechain I/O | 1/4" |
| Metering | LED Meter |
| Power Supply | 100-240 V, 50/60 Hz |
Details the THRESHOLD control and CLOSE LED for the expander/gate.
Explains controls for compression/limiting: IN/OUT, THRESHOLD, RATIO, ATTACK, RELEASE, AUTO, OUTPUT, GAIN REDUCTION.
Describes the PROCESS control for dynamic enhancement and its usage with compression.
Instructions for recording the serial number for warranty registration purposes.
Guidance on connecting the unit to the mains power supply.
Information on selecting the correct fuse type and operating voltage for the unit.
Details the AUDIO IN, AUDIO OUT, and KEY INSERT connections for signal processing.
Details impedance, nominal and max. input levels, and CMR for audio inputs.
Provides specifications for the key input, including impedance and max. input level.
Lists output type, impedance, max. output level, bandwidth, THD, IMD, noise, and crosstalk.
Outlines technical parameters for the compressor and gate sections, including type and variable ranges.
Specifies parameters for the dynamic enhancer and function switch types (Bypass, Auto).
Details the types of displays (LEDs) and power supply requirements (voltage, consumption, fuse).
Provides the physical dimensions and weight of the unit for installation and handling.
To Next Page