Need help?Do you have a question about the Behringer Composer MDX 2100 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Connectors | XLR, 1/4" TRS |
| Output Connectors | XLR, 1/4" TRS |
| Signal to Noise Ratio | > 90 dB |
| Input Impedance | 10 kΩ |
| Controls | Threshold, Ratio, Attack, Release, Bypass |
| Sidechain I/O | Yes |
| Metering | LED Level Meter |
| Power Supply | 100-240V, 50/60Hz |
| Dimensions | 19" x 1.75" x 6.3" |
Engages stereo mode; left channel controls both audio paths, overriding channel 2 settings.
Controls for the Expander/Gate section, including Threshold, EXP LED, and Release.
Controls for the Compressor section, including IN/OUT, Threshold, Ratio, Attack, Release, AUTO, and Output.
Includes KEY EXT and KEY LISTEN switches for sidechain management and GAIN REDUCTION/LEVEL meters.
Controls for the Peak Limiter section, including LEVEL control and PEAK LED indicator.
Includes SERIAL NUMBER, FUSE HOLDER/VOLTAGE SELECTOR, and MAINS CONNECTOR for unit setup and maintenance.
Details AUDIO IN, AUDIO OUT, OPERATING LEVEL switch, KEY SEND, and KEY RETURN connections.
Details impedance, operating levels, and max input levels for audio and key inputs.
Provides specifications for audio and key outputs, including bandwidth, THD, noise, and crosstalk.
Details the types, ratios, thresholds, attack, and release parameters for these sections.
Specifies Peak Limiter attack/release and the functions of In/Out, Key Extern, Key Listen, and Couple switches.
Lists indicator types, power supply requirements, and physical dimensions/weights.
To Next Page