Need help?Do you have a question about the Behringer COMPOSER PRO MDX2200 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Connectors | XLR and 1/4" TRS |
| Output Connectors | XLR and 1/4" TRS |
| Inputs | 2 x XLR, 2 x 1/4" TRS |
| Outputs | 2 x XLR, 2 x 1/4" TRS |
| Signal to Noise Ratio | > 90 dB |
| Input Impedance | 10 kΩ |
| Maximum Input Level | +22dBu |
| Maximum Output Level | +22dBu |
| Controls | Threshold, Ratio, Attack, Release |
| Frequency Response | 10Hz |
| Sidechain I/O | 1/4" TRS |
| Metering | LED Metering |
| Functions | Compression, Limiting |
| Power Supply | 100-240V, 50/60Hz |
| Dimensions | 19" x 1.75" |
Provides comprehensive safety guidelines for operation, installation, and maintenance of the appliance.
Details the controls for the Expander/Gate section, including Threshold, Release, and Ratio.
Explains the various controls for the Compressor section, such as Threshold, Ratio, Attack, and Release.
Describes the controls for the Peak Limiter section, focusing on Threshold and its protective function.
Identifies and explains the functions of the rear-panel connectors and controls.
Explains different dynamic processing modes: compression, levelling, limiting, and clipping.
Lists parameters and technical details for the Expander/Gate and Compressor sections.
Covers Peak Limiter parameters, function switch descriptions, and available options.
Details the warranty period, coverage, exclusions, and regulations for service claims.
To Next Page
