Behringer V-Verb Pro REV2496 - Page 3

3
V-VERB PRO REV2496
SPECIFICATIONS
ANALOG INPUTS
Type XLR balanced
1/4" TRS stereo balanced
Impedance approx. 22 kΩ balanced
Max. input level +16 dBu
CMRR typ. 40 dB
ANALOG OUTPUTS
Type XLR, servo-balanced
1/4" TRS stereo servo-balanced
Impedance approx. 100 Ω balanced
Max. output level +16 dBu
SYSTEM SPECIFICATIONS
Frequency range <10 Hz - 20 kHz @ 44.1 kHz
<10 Hz - 22 kHz @ 48 kHz
<10 Hz - 46 kHz @ 96 kHz
Signal-to-noise ratio -90 dBu
Dynamic range 106 dB (analog in ß analog out)
THD 0,007% typ. @ +4dBu, 1 kHz, Gain 1
Crosstalk < -100 dB (analog in ß analog out)
Signal delay < 1 ms (analog in ß analog out)
DIGITAL INPUT 1
Type XLR servo-balanced
Standard AES/EBU or S/PDIF
input impedance 110 Ω
nominal input level 0.2 - 5 V peak-to-peak
DIGITAL INPUT 2
Type TOSLINK optical
Standard AES/EBU or S/PDIF
DIGITAL OUTPUT 1
Type XLR servo-balanced
Standard AES/EBU or S/PDIF
DIGITAL OUTPUT 2
Type TOSLINK optical
Standard AES/EBU or S/PDIF
SYNC INPUT
Type BNC
Standard Wordclock (1 x sample rate)
input impedance approx. 50 kΩ
Nom. level 2 - 6 V peak-to-peak
MIDI Interface
Type 5-pin DIN jacks In/Out/Thru
Implementation cf. MIDI implementation chart
DIGITAL PROCESSING
Processor high-resolution SHARC
®
DSP, 600 MFLOPs, 32-bit internal signal processing
Converter 24 Bit/96 kHz
Sample rate external, 44.1 kHz, 48 kHz, 96 kHz
DISPLAY
Type 128 x 64 backlit liquid crystal display (green) with adjustable contrast
MEMORY
Presets 100 ROM + 100 user presets for engines A and B, 100 ROM + 100 user presets for combinations
POWER SUPPLY
Mains voltage 85  250 V~, 50  60 Hz
Power consumption 10 W typ.
Fuse T 1 A H
Mains connector Standard receptacle
DIMENSIONS/WEIGHT
Dimensions 19" (482.6 mm) x 1 ¾" (44.5 mm) x 8 ½" (217 mm)
Weight approx. 4 ¾" lbs. (2.15 kg)
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the
specifications and design of the device may differ from the information given in this manual.