behringer .com
FX2000 VIRTUALIZER 3D • pg 24
Important
information
Aspectos
importantes
Informations
importantes
Other important information
Register online.1. Please register your
new BEHRINGER equipment right after
you purchase it by visiting behringer. com.
Registering your purchase using our
simple online form helps us to process
your repair claims more quickly and
efficiently. Also, read the terms and
conditions of our warranty, if applicable.
Malfunction.2. Should your BEHRINGER
dealer not be located in your vicinity, you
may contact the BEHRINGER distributor
for your country listed under “Support” at
behringer. com. Should your country not be
listed, please check if your problem can be
dealt with by our “Online Support” which
may also be found under “Support” at
behringer. com. Alternatively, please submit
an online warranty claim at behringer. com
BEFORE returning the product.
Power Connections.3. Before plugging
the unit into a power socket, please make
sure you are using the correct mains
voltage for your particular model. Faulty
fuses must be replaced with fuses of the
same type and rating without exception.
Registro online. 1. Le recomendamos
que registre su nuevo aparato BEHRINGER
justo después de su compra accediendo a
la página web behringer. com. El registro
de su compra a través de nuestro sencillo
sistema online nos ayudará a resolver
cualquier incidencia que se presente
a la mayor brevedad posible. Además,
aproveche para leer los términos y
condiciones de nuestra garantía, si es
aplicable en su caso.
Averías.2. En el caso de que no
exista un distribuidor BEHRINGER en
las inmediaciones, puede ponerse en
contacto con el distribuidor BEHRINGER
de su país, que encontrará dentro del
apartado “Support” de nuestra página
web behringer. com. En caso de que su
país no aparezca en ese listado, acceda a
la sección “Online Support” (que también
encontrará dentro del apartado “Support”
de nuestra página web) y compruebe
si su problema aparece descrito y
solucionado allí. De forma alternativa,
envíenos a través de la página web una
solicitud online de soporte en periodo
de garantía ANTES de devolvernos
el aparato.
Conexiones de corriente.3. Antes de
enchufar este aparato a una salida de
corriente, asegúrese de que dicha salida
sea del voltaje adecuado para su modelo
concreto. En caso de que deba sustituir
un fusible quemado, deberá hacerlo
por otro de idénticas especificaciones,
sin excepción.
Enregistrez-vous en ligne.1. Prenez
le temps d’enregistrer votre produit
BEHRINGER aussi vite que possible sur
le site Internet behringer. com. Le fait
d’enregistrer le produit en ligne nous
permet de gérer les réparations plus
rapidement et plus efficacement. Prenez
également le temps de lire les termes et
conditions de notre garantie.
Dysfonctionnement.2. Si vous n’avez
pas de revendeur BEHRINGER près de
chez vous, contactez le distributeur
BEHRINGER de votre pays : consultez la
liste des distributeurs de votre pays dans
la page “Support” de notre site Internet
behringer. com. Si votre pays n’est pas
dans la liste, essayez de résoudre votre
problème avec notre “aide en ligne”
que vous trouverez également dans la
section “Support” du site behringer. com.
Vous pouvez également nous faire
parvenir directement votre demande
de réparation sous garantie par Internet
sur le site behringer. com AVANT de nous
renvoyer le produit.
Raccordement au secteur.3. Avant
de relier cet équipement au secteur,
assurez-vous que la tension secteur
de votre région soit compatible avec
l’appareil. Veillez à remplacer les fusibles
uniquement par des modèles exactement
de même taille et de même valeur
électrique — sans aucune exception.
behringer .com
FX2000 VIRTUALIZER 3D • pg 25
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Responsible party name: BEHRINGER USA, Inc.
Address: 18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.: Phone: +1 425 672 0816
Fax: +1 425 673 7647
hereby declares that the product
FX2000 VIRTUALIZER 3D
complies with the FCC rules as mentioned in the following
paragraph:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different •
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for •
help.
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly
approved by BEHRINGER USA can void the user’s authority to
use the equipment.
FX2000 VIRTUALIZER 3D
To Next Page
Loading...
Need help?
Analog Inputs and Outputs
Power
Weight and Dimensions
