Need help?Do you have a question about the Behringer EURODESK MX3282A and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 32 |
| Line Inputs | 32 |
| Aux Sends | 6 |
| Returns | 4 |
| Group Outputs | 8 |
| Main Outputs | 2 |
| Phantom Power | Yes |
| Faders | 100mm |
Essential safety guidelines for operation, including electrical hazards and environmental factors.
Comprehensive instructions on safe operation, maintenance, and servicing to prevent damage or injury.
Instructions for connecting the PSU, selecting the correct voltage, and fuse replacement.
Safety precautions regarding connecting and disconnecting the PSU and console.
Description of balanced line and XLR mic inputs, phantom power, and setting input levels with GAIN.
Guide to setting channel input levels using GAIN and SOLO/PFL for monitoring.
Explanation of the 3-band semi-parametric EQ, low-cut filter, and their frequency/slope settings.
Details on the eight aux sends, their pre/post-fader switching, and gain structure.
Explanation of insert points for adding dynamic processing or EQ to channels, groups, or the mix.
Explanation of Solo-in-Place and Pre-Fader Listen (PFL) modes for signal auditioning and gain setting.
Instructions for selecting inputs, initializing channels, and setting gain minimum.
Procedure for auditioning signals using PFL and adjusting GAIN for optimal input levels.
Guidance on setting up for live concerts and simultaneous 8-track recording, including mic placement and EQ.
Guidance for 16-track studio recording of live bands, including monitor feeds and tape returns.
Advice on setting recording levels for digital and analog formats to avoid distortion and maximize dynamic range.
Guidance on setting desk levels, master aux send levels, and optimizing outboard processor gain.
Details on warranty card registration, return authorization, and warranty claim procedures.
Explanation of BEHRINGER's warranty terms, conditions, exclusions, and limitations.
To Next Page
