Need help?Do you have a question about the Behringer ULTRAFEX PRO EX3200 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | > 90 dB |
| Inputs | 2 x XLR, 2 x 1/4" TRS |
| Outputs | 2 x XLR, 2 x 1/4" TRS |
| Form Factor | Rackmount |
| Rack Spaces | 1U |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ω |
| Frequency Response | 20 Hz to 20 kHz |
| Dynamic Range | >100dB |
| Total Harmonic Distortion (THD) | < 0.05% |
| THD @ +4dBu | <0.1% |
Guidance on verifying and setting the correct mains voltage to ensure proper and safe unit operation.
Explanation of the Multiband Processor controls: IN/OUT, AUTO NR, NR SENSITIVITY, TUNE, PROCESS, HIGH MIX.
Explanation of the SHIFT, LOW MIX, and MODE controls for shaping the bass frequencies.
Description of the SURROUND switch and SURROUND control for enhancing stereo width and imaging.
Describes two primary configuration methods: 'In-Line' processor and 'Sidechain' processor for system integration.
Recommended initial control settings for understanding functionality and achieving optimal sound enhancement.
Overview of practical scenarios including replay, recording, and subgroup processing.
Improving intelligibility, range, and clarity of P.A. systems for announcements and background music.
To Next Page