Need help?Do you have a question about the Behringer Ultrabass BX3000T and is the answer not in the manual?
General| Type | Bass Amplifier |
|---|---|
| Power Output | 300W |
| Equalization | 3-band EQ |
| Effects | Built-in compressor |
| Weight | 49.6 lbs |
| Speaker Configuration | 1x15" |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| EQ | Mid |
Explains the fundamental design principles and low-noise nature of the bass amplifier.
Details the unique DYNAMIZER preamp technology for punchy sound and peak handling.
Provides essential information and steps for initial setup and operation before using the amplifier.
Advises on checking the unit for damage upon arrival and reporting any transit issues.
Covers crucial initial setup steps like ventilation, voltage check, and mains connection.
Instructs users to register their product for extended warranty benefits.
Details all controls and functions located on the front panel of the BX3000T amplifier.
Illustrates a basic setup for rehearsals, sessions, and club gigs with essential components.
Shows an advanced setup connecting a tuner and a mixing console for enhanced flexibility.
Provides the formula and examples for calculating total impedance when connecting multiple speakers.
Describes how to use the BX3000T as the primary unit in a master/slave setup.
Explains using the BX3000T as a slave unit controlled by an external amplifier or preamp.
Covers connecting the amplifier to the main power supply using the provided cable and IEC receptacle.
Describes various audio input and output connections, including jacks, XLR, and SPEAKON.
Details how to connect loudspeakers using 1/4" and SPEAKON connectors, including impedance and power ratings.
Outlines the process for registering the product to qualify for extended warranty coverage.
Specifies the warranty period, coverage for defects, and BEHRINGER's responsibilities for repair or replacement.
Explains the procedure for obtaining a return authorization number before sending the product for service.
Details general warranty regulations, exclusions, improper handling, and unauthorized repairs.
Clarifies that the warranty is non-transferable and only valid for the original buyer.
States that BEHRINGER is not liable for consequential damages, limiting liability to the product's invoiced value.
Addresses statutory buyer rights under national law and how they interact with the provided warranty terms.
To Next Page
